Future Automation PM-UNI Projector Ceiling Mount Bracket

The bracket is listed on the manufacturers website with a Sony projector fitted and this is the same range of projectors I have installed. The packaging fits the bracket snug inside and the accessory pack, with various ranges of bolts/screws, is ample depending how you are fitting the bracket to the celling either straight into plaster or through a support beam – the bracket is medium weight and with the projector fitted it is going to be quite considerable to make sure you check how you are fitting the bracket to the ceiling so it takes the weight! The instructions are straight forward and assembly was fairly quick. Once the bracket is fitted to the ceiling the projector clips on and it is surprising that one clip holds the projector with the 2 screws either side of the projector section to marry up with the ceiling fit. There are two adjustments either side to balance out the trajectory of the throw of the projector. Once all fitted it is easy to tilt up and down to fit the size screen. Delivery was quick and with protective packaging. Price was very good as well. Only slight challenge with the tracking information. At the time there was an option to provide a message and I requested the tracking details so I could see when it was going to be delivered and by which courier. I only received a response after the courier attempted to deliver and then I had the tracking number to rearrange a delivery so I could collect from a local collection point. Perhaps this was just missed by the ordering team. Overall very happy with the bracket and service. My installer said he was going to start using these brackets as it was easy for him to setup.